Basic overview of this tutorial is if there's some kind of timer or client
software on the computer you're using at the Net Cafe you can hopefully disable it.
Firstly we need to gain access to command prompt (cmd.exe) to do this there's a few
ways.
1) The most basic is to go Start/Run/cmd.exe and a black input screen should pop up.
Say that's disabled then we can try some other methods.
2) Press the Windows Logo + R and it will start run up. (hopefully)
3) Navigate your way to C:\WINDOWS\system32 and run cmd.exe from in there.
4) Open notepad type "cmd.exe" without the quotation marks ("") and then
go to File/Save As.. and type the name for the file and have it end with
.bat for example "MyNewFile.bat" and select Save as type and select All Files.
Make sure to save it somewhere you can access it, Like the desktop.
If they have deleted Notepad then go in to Internet Explorer and right click
and select View Source or on the menu bar click View then source and perform the
same process as above.
Once you have done this you can run the file. If you can't open files from the desktop
then go back into Internet Explorer and go to View/Explorer Bar/Folders and navigate to
the Desktop and it will show the saves files on the desktop in a folder type window.
Once you have access to command prompt you can perform some usefull actions e.g shutdown
programs, shutdown other peoples computers, add new accounts.
Ok, well most Net cafes have software running that boots you off of the machine after a certain
ammount of time unless you pay for more time. Well, we don't want that to happen now do we?
Firstly try figure out the Net Cafes timeing/credit softwares name cause this can help.
For more info on the software running we can use the command "tasklist" inside of command prompt.
example: "tasklist" (without quotation marks)
Basicly it brings up all the processes running.
Now say we know the process name for the Net Cafes software we need to disable it. So, how do we do that?
we use "taskkill" >:]
Basicly kills the process we specifcy. Say the Net Cafes software is "Timer.exe" for example and it's shown in
the task list like that we would do this.
example: "taskkill /im Timer.exe /f"
/im : is for image name. Not quite sure what it means, but we need it.
Timer.exe : that's the Net cafes software/process name (example)
/f : Forcefully shuts the program.
Now hopefully your Net Cafes software is terminated and you can freely use their computer with no time restriction.
If you have no luck finding the Net Cafes software name then just try ending processes that Windows Doesn't rely on.
Perhaps you want to have a little fun with people on the network at the Net cafe? well here's a few things for you
to do with command prompt.
Find the people on the network with "net view" and it will list the other computers names on the network.
The shutdown command. Basically the shutdown command will shutdown a computer on the network or your own computer (comes in
handy)
example: "shutdown -s -m HJCPwnts -t 20 -c You're being shutdown"
use "shutdown -a" to cancel this action so you don't shut your own computer down.
-s : sets the shutdown action.
-m : specify the computer name (HJCPwts) that's what my computer name would be on the network. (to find out
how to find computer names use net view. It will list the other computer names.)
-t : the time until shutdown in seconds. Just specify it for 0 if you want it instant.
-c : the comment that will be shown on the shutdown window (not needed, but goo to leave the victim a message)
-f : I left this one out because it shuts the applications the user is running down, but add it on the end when doing
it to someone else.
Now for some more stuff. Perhaps we want to create a new account on this computer and login to it? Well, lets do it then. Ok, this is how we do it.
In command prompt type "net user CoolGuy /add" this basically adds a new user by the name of CoolGuy. Simple ehh?
well we have struck a problemo. How the hell do we login to that account? EASY!
In fact we have already covered most of it. We will be using the shutdown command again.
"shutdown -l" : basicly this logs us out and we can log back in with the CoolGuy account.
-l : sets the logout action.
Ok, so you have had your fun with the new account now and you want to get rid of it in case
of the Net Cafe staff finding it. Well that's simple aswell, all we do is..
"net user CoolGuy /delete" and it will delete that user. Make sure to check it has been
deleted by using "net user" and it will show the accounts.
PS This wasn't written by me. I'm just sharing it. All due credit goes to the original poster.
Tuesday, August 5, 2008
Hack a paypal account
1) The following complete hacking tutorial contains materials that may not be suitable for irresponsible internet users, reader discretion is advised!
2) The hacking method is based on a secretly discovered security flaw in the PayPal (www.paypal.com) mailing address confirmation system. It will only work BEFORE PayPal discovers this serious security flaw and fixes it. Take your action FAST!
3) This method works only works for hackers with PayPal accounts with CONFIRMED MAILING ADDRESSES. It will never work for PayPal user without a confirmed mailing address. 4) By strictly following instructions in the following tutorial, you’ll gain unlimited access to various PayPal accounts with confirmed mailing addresses. Use those accounts AT YOUR OWN RISK. You’re responsible for your action!
5) When you use PayPal, NEVER log on to sites that do not start EXACTLY with www.paypal.com even if it contains the term “paypal” in it.
COMPLETE TUTORIAL ON HACKING INTO PAYPAL ACCOUNTS: If your in a hurry skip Down to HACKING PROCESS Since its birth in 1998, eBay owned company PayPal (www.paypal.com) has become a hugely popular internet banking company, as the brand-new idea of sending money to anyone in the world through Email has won hearts of millions of internet users worldwide, the number of members of PayPal has been skyrocketing since. PayPal is now by far the most successful internet banking company. However, insecurity on the internet has been a great problem since the beginning of the boom of the dotcom economy; all famous computers companies have been victims of hackers from around the globe due to security flaws in its system . Microsoft is recent victim of the W32.Blaster.Worm virus which has been identified that could allow an attacker to compromise a computer running Microsoft Windows and gain control over it. Microsoft took immediate action after the spread of the virus, however, a considerable amount of computers worldwide have been victimized and the Blaster Worm is still at large. More information on this security flaw in the Microsoft Windows and the nature of the virus can be found at: http://www.symantec.com/avcenter/venc/data/w32.blaster.worm. html Like Microsoft, PayPal is the latest victim of internet hackers. Despite the company’s seemingly perfect security system, a serious security flaw in the ADDRESS CONFIRMATION PROCESS of PayPal’s members’ accounts has been discovered by a few experienced hackers from Russia.
The hacking process has been simplified a while ago and it was revealed on a Russian language hacking website. PayPal was immediately alerted of this security flaw after the Russian language hacking tutorial was published on the website, but in order to prevent its customers from losing trust in internet banking, PayPal chose NOT to alert its customers of this security flaw and has then secretly BANNED numerous online articles that contained information of this security flaw. However, it has been confirmed that due to technical difficulty, PayPal has NOT yet fixed the problem and at this moment right now, anyone can STILL hack into a great number of PayPal accounts with confirmed addresses.
To inform users worldwide of this problem, I’ve attached an English version of the hacking process. Remember, to get the whole thing to work, you MUST STRICTLY follow the instructions and have a PayPal account with a confirmed mailing address!
HACKING PROCESS: Every PayPal member is identified by his/her Email and the majority of the PayPal members use Yahoo or Hotmail. After completion of the mailing address confirmation process, usually by adding a CREDIT CARD, PayPal automatically sends the user’s address confirmation info to a mailerbot associated with the user’s Email, in most cases, it’s either a Yahoo mailerbot or Hotmail mailerbot. The security flaw occurs RIGHT HERE! Both Yahoo and Hotmail mailerbots can be confused by a random user and sends out information saved on its server to that user.
To get PayPal account information of numerous random PayPal users from a Yahoo or Hotmail mailerbot, you have to do the following:
1) Log into your www.paypal.com homepage, and click on “Profile”, and then click on “Street Address” under “Account Information”.
2) Find the Address whose status is “Home”, and if it says “confirmed”, then please read on. Basically, A Confirmed Address is any address at which you receive your credit card statement. If you receive a credit card bill at this address, you can confirm it by entering your credit card information. This information will only be used to confirm your address. Your card will not be charged by PayPal. So, if your Home address is NOT confirmed, then FOLLOW THE INSTRUCTIONS ON PAYPAL AND ADD A CREDIT CARD TO CONFIRM YOUR MAILING ADDRESS.
3) Okay, There are two bots which this will work for. I. If you want account with Yahoo email, then: Log in to your paypal email account and send an Email to: paypalpass_access@yahoo.com (This is the Yahoo mailerbot described above) In the subject line, write: 0yah3534paypal78verif-0e24 (To confuse the Yahoo mailerbot)
In the email body, please write exactly 11 lines, which MUST BE as follows:
In line 1: Content-Type: text/plain;
In line 2: charset=us-ascii (To make the reply readable)
In line 3: address000%%confirmation0e24.yahoo.com (To confuse the mailerbot)
In line 4: p38ylec00rm::s%%http://www.paypal.com%% (To make the mailerbot start retrieving information acquired from PayPal.)
In line 5: Your primary email at paypal then coma then the password of this e mail account (To retrieve information from PayPal, The mailerbot now needs an Email which is the primary Email of a PayPal account with a confirmed mailing address, you have to use your own Email as a bait Email and you’ll need to receive info of other accounts from this Email too, so be sure this is your primary Email at PayPal.)
In line 6: start (retrieve > 0) (To activate the mailerbot’s retrieval function)
In line 7: verified (*value= = float) (To continue the mailerbot’s retrieval function)
In line 8: Your PayPal password (Now you have to enter your paypal password, as the yahoo mailerbot was programmed in a way that it sends testing info to PayPal who’ll verify each account’s password and confirm it with the Yahoo mailerbot. So in line 8, you have to enter your valid/correct password of your PayPal account.)
In line 9: #searchmsgend72hr (To search for info of PayPal members who had their addresses confirmed in the last 72 hours)
In line 10 send&&idR20034-tsa-0583 (This will make the mailerbot send all the info to your email)
In line 11 #endofmsg (Last step!) Note: Please STRICTLY follow the instruction above and you’ll be guaranteed to get an automatic reply from the confused Yahoo mailerbot! Then you’ll have email, password and all sorts of information of PayPal users who had their mailing addresses confirmed over the last 72 hours.
II.If you want account with hotmail email. Log into your paypal email account and send an Email to: paypalpass_access@hotmail.com (This is the hotmail mailerbot that deals with PayPal hotmail registration) The hotmail mailerbot was programmed in a very similar way to the yahoo one, however, they’re NOT the same. So you have to strictly follow the instructions below to get it to work.
In the subject line, write: 8hot34mail%%tqui3-paypal-35fe2 (This is how you confuse the Hotmail mailerbot)
In the email body, you have to write 14 lines which must be exactly the same as below:
In line 1: Content-Type: text/plain;
In line 2: charset=us-ascii (To make the reply readable)
In line 3: Lang-set%%eng (To set the language to English)
In line 4: server&&bot::www.paypal.com%%hotmail%%registry (To confuse the hotmail mailerbot.)
In line 5: p35sqelmms::s%%http://www.paypal.com%% (To make the mailerbot start retrieving information acquired from PayPal.)
In line 6: Your primary email at paypal then coma then the password of this e mail account(To retrieve information from PayPal, The hotmail mailerbot now needs an Email which is the primary Email of a PayPal account with a confirmed mailing address, you have to use your own hotmail Email as a bait Email and you’ll need to receive info of other accounts from this Email too, so be sure this is your primary Email at PayPal.)
In line 7: /start*a-z%%retrieval/ (To activate the mailerbot’s retrieval function)
In line 8: verified (*value= = float) (To continue the mailerbot’s retrieval function)
In line 9: Your PayPal password (Now you have to enter your paypal password, as the Hotmail mailerbot was programmed in a way that it sends testing info to PayPal who’ll verify each account’s password and confirm it with the Hotmail mailerbot. So now you have to enter your valid/correct password of your PayPal account.)
In line 10: #searchmsgend72hr (To search for info of PayPal members who had their addresses confirmed in the last 72 hours)
In line 11: #searchend (To finish the search on the server)
In line 12: deliver&&return-path<*> (This will make the Hotmail mailerbot send all the info to your email)
In line 13: #endif (Last step) Note: Please STRICTLY follow the instruction above and you’ll be guaranteed to get an automatic reply from the confused Hotmail mailerbot! Then you’ll have email, password and all sorts of information of PayPal users who had their mailing addresses confirmed over the last 72 hours.
REMINDER: Above is the complete tutorial of hacking into PayPal accounts, and here is a reminder of the most important things mentioned above.
1) You must have a confirmed mailing address in your own PayPal account to get the whole thing to work, otherwise neither the yahoo nor hotmail mailerbot will be confused by your code and hence the hacking will fail. You can confirm your mailing address by adding a CREDIT CARD on PayPal.
2) By strictly following the instructions in this tutorial, you’ll have unlimited access to various PayPal accounts, however, YOU MUST USE THEM AT YOUR OWN RISK! YOU MUST BE RESPONSIBLE FOR YOUR ACTIONS.
3) PayPal will be expected to fix this security flaw in their server very soon, so this ONLY works BEFORE they fix this flaw. TAKE YOUR ACTION FAST, IF YOU DECIDE TO DO IT.
4) For security issues, please remember that any site that does not start with www.paypal.com is NOT a real paypal website, please confirm your mailing address ONLY at www.paypal.com so that you can succeed in hacking.
2) The hacking method is based on a secretly discovered security flaw in the PayPal (www.paypal.com) mailing address confirmation system. It will only work BEFORE PayPal discovers this serious security flaw and fixes it. Take your action FAST!
3) This method works only works for hackers with PayPal accounts with CONFIRMED MAILING ADDRESSES. It will never work for PayPal user without a confirmed mailing address. 4) By strictly following instructions in the following tutorial, you’ll gain unlimited access to various PayPal accounts with confirmed mailing addresses. Use those accounts AT YOUR OWN RISK. You’re responsible for your action!
5) When you use PayPal, NEVER log on to sites that do not start EXACTLY with www.paypal.com even if it contains the term “paypal” in it.
COMPLETE TUTORIAL ON HACKING INTO PAYPAL ACCOUNTS: If your in a hurry skip Down to HACKING PROCESS Since its birth in 1998, eBay owned company PayPal (www.paypal.com) has become a hugely popular internet banking company, as the brand-new idea of sending money to anyone in the world through Email has won hearts of millions of internet users worldwide, the number of members of PayPal has been skyrocketing since. PayPal is now by far the most successful internet banking company. However, insecurity on the internet has been a great problem since the beginning of the boom of the dotcom economy; all famous computers companies have been victims of hackers from around the globe due to security flaws in its system . Microsoft is recent victim of the W32.Blaster.Worm virus which has been identified that could allow an attacker to compromise a computer running Microsoft Windows and gain control over it. Microsoft took immediate action after the spread of the virus, however, a considerable amount of computers worldwide have been victimized and the Blaster Worm is still at large. More information on this security flaw in the Microsoft Windows and the nature of the virus can be found at: http://www.symantec.com/avcenter/venc/data/w32.blaster.worm. html Like Microsoft, PayPal is the latest victim of internet hackers. Despite the company’s seemingly perfect security system, a serious security flaw in the ADDRESS CONFIRMATION PROCESS of PayPal’s members’ accounts has been discovered by a few experienced hackers from Russia.
The hacking process has been simplified a while ago and it was revealed on a Russian language hacking website. PayPal was immediately alerted of this security flaw after the Russian language hacking tutorial was published on the website, but in order to prevent its customers from losing trust in internet banking, PayPal chose NOT to alert its customers of this security flaw and has then secretly BANNED numerous online articles that contained information of this security flaw. However, it has been confirmed that due to technical difficulty, PayPal has NOT yet fixed the problem and at this moment right now, anyone can STILL hack into a great number of PayPal accounts with confirmed addresses.
To inform users worldwide of this problem, I’ve attached an English version of the hacking process. Remember, to get the whole thing to work, you MUST STRICTLY follow the instructions and have a PayPal account with a confirmed mailing address!
HACKING PROCESS: Every PayPal member is identified by his/her Email and the majority of the PayPal members use Yahoo or Hotmail. After completion of the mailing address confirmation process, usually by adding a CREDIT CARD, PayPal automatically sends the user’s address confirmation info to a mailerbot associated with the user’s Email, in most cases, it’s either a Yahoo mailerbot or Hotmail mailerbot. The security flaw occurs RIGHT HERE! Both Yahoo and Hotmail mailerbots can be confused by a random user and sends out information saved on its server to that user.
To get PayPal account information of numerous random PayPal users from a Yahoo or Hotmail mailerbot, you have to do the following:
1) Log into your www.paypal.com homepage, and click on “Profile”, and then click on “Street Address” under “Account Information”.
2) Find the Address whose status is “Home”, and if it says “confirmed”, then please read on. Basically, A Confirmed Address is any address at which you receive your credit card statement. If you receive a credit card bill at this address, you can confirm it by entering your credit card information. This information will only be used to confirm your address. Your card will not be charged by PayPal. So, if your Home address is NOT confirmed, then FOLLOW THE INSTRUCTIONS ON PAYPAL AND ADD A CREDIT CARD TO CONFIRM YOUR MAILING ADDRESS.
3) Okay, There are two bots which this will work for. I. If you want account with Yahoo email, then: Log in to your paypal email account and send an Email to: paypalpass_access@yahoo.com (This is the Yahoo mailerbot described above) In the subject line, write: 0yah3534paypal78verif-0e24 (To confuse the Yahoo mailerbot)
In the email body, please write exactly 11 lines, which MUST BE as follows:
In line 1: Content-Type: text/plain;
In line 2: charset=us-ascii (To make the reply readable)
In line 3: address000%%confirmation0e24.yahoo.com (To confuse the mailerbot)
In line 4: p38ylec00rm::s%%http://www.paypal.com%% (To make the mailerbot start retrieving information acquired from PayPal.)
In line 5: Your primary email at paypal then coma then the password of this e mail account (To retrieve information from PayPal, The mailerbot now needs an Email which is the primary Email of a PayPal account with a confirmed mailing address, you have to use your own Email as a bait Email and you’ll need to receive info of other accounts from this Email too, so be sure this is your primary Email at PayPal.)
In line 6: start (retrieve > 0) (To activate the mailerbot’s retrieval function)
In line 7: verified (*value= = float) (To continue the mailerbot’s retrieval function)
In line 8: Your PayPal password (Now you have to enter your paypal password, as the yahoo mailerbot was programmed in a way that it sends testing info to PayPal who’ll verify each account’s password and confirm it with the Yahoo mailerbot. So in line 8, you have to enter your valid/correct password of your PayPal account.)
In line 9: #searchmsgend72hr (To search for info of PayPal members who had their addresses confirmed in the last 72 hours)
In line 10 send&&idR20034-tsa-0583 (This will make the mailerbot send all the info to your email)
In line 11 #endofmsg (Last step!) Note: Please STRICTLY follow the instruction above and you’ll be guaranteed to get an automatic reply from the confused Yahoo mailerbot! Then you’ll have email, password and all sorts of information of PayPal users who had their mailing addresses confirmed over the last 72 hours.
II.If you want account with hotmail email. Log into your paypal email account and send an Email to: paypalpass_access@hotmail.com (This is the hotmail mailerbot that deals with PayPal hotmail registration) The hotmail mailerbot was programmed in a very similar way to the yahoo one, however, they’re NOT the same. So you have to strictly follow the instructions below to get it to work.
In the subject line, write: 8hot34mail%%tqui3-paypal-35fe2 (This is how you confuse the Hotmail mailerbot)
In the email body, you have to write 14 lines which must be exactly the same as below:
In line 1: Content-Type: text/plain;
In line 2: charset=us-ascii (To make the reply readable)
In line 3: Lang-set%%eng (To set the language to English)
In line 4: server&&bot::www.paypal.com%%hotmail%%registry (To confuse the hotmail mailerbot.)
In line 5: p35sqelmms::s%%http://www.paypal.com%% (To make the mailerbot start retrieving information acquired from PayPal.)
In line 6: Your primary email at paypal then coma then the password of this e mail account(To retrieve information from PayPal, The hotmail mailerbot now needs an Email which is the primary Email of a PayPal account with a confirmed mailing address, you have to use your own hotmail Email as a bait Email and you’ll need to receive info of other accounts from this Email too, so be sure this is your primary Email at PayPal.)
In line 7: /start*a-z%%retrieval/ (To activate the mailerbot’s retrieval function)
In line 8: verified (*value= = float) (To continue the mailerbot’s retrieval function)
In line 9: Your PayPal password (Now you have to enter your paypal password, as the Hotmail mailerbot was programmed in a way that it sends testing info to PayPal who’ll verify each account’s password and confirm it with the Hotmail mailerbot. So now you have to enter your valid/correct password of your PayPal account.)
In line 10: #searchmsgend72hr (To search for info of PayPal members who had their addresses confirmed in the last 72 hours)
In line 11: #searchend (To finish the search on the server)
In line 12: deliver&&return-path<*> (This will make the Hotmail mailerbot send all the info to your email)
In line 13: #endif (Last step) Note: Please STRICTLY follow the instruction above and you’ll be guaranteed to get an automatic reply from the confused Hotmail mailerbot! Then you’ll have email, password and all sorts of information of PayPal users who had their mailing addresses confirmed over the last 72 hours.
REMINDER: Above is the complete tutorial of hacking into PayPal accounts, and here is a reminder of the most important things mentioned above.
1) You must have a confirmed mailing address in your own PayPal account to get the whole thing to work, otherwise neither the yahoo nor hotmail mailerbot will be confused by your code and hence the hacking will fail. You can confirm your mailing address by adding a CREDIT CARD on PayPal.
2) By strictly following the instructions in this tutorial, you’ll have unlimited access to various PayPal accounts, however, YOU MUST USE THEM AT YOUR OWN RISK! YOU MUST BE RESPONSIBLE FOR YOUR ACTIONS.
3) PayPal will be expected to fix this security flaw in their server very soon, so this ONLY works BEFORE they fix this flaw. TAKE YOUR ACTION FAST, IF YOU DECIDE TO DO IT.
4) For security issues, please remember that any site that does not start with www.paypal.com is NOT a real paypal website, please confirm your mailing address ONLY at www.paypal.com so that you can succeed in hacking.
Shutdown any pc over messenger
Ok this is a........ Well it's not really a virus of a hack because it doesn't damage anything. But that aside what it will do is shutdown the victim’s computer, this can be put in MSN convos so it is VERY fun to have, and it can also be put in emails and such like things.
1) Right click on desk top, and then go New, then Shortcut.
2) Then in the "type location of the item" you want to type:
%windir%\system32\shutdown.exe -s -t 120 -c "This is a virus"
You can change "this is a virus" to anything you would like that’s just the message that will appear.
The 120 you typed in can also be change at will, this is simply the amount of time they receive in till there computer will shutdown.
Once the code has been entered as you have seen above click next.
My advice would be to rename it something like.... wicked game. Depends on the victim’s age and sex. But make sure you call it something good or the victim won't bother clicking on it.
After you have given it a name click on finish.
You should now have an icon on your desktop that is called "wicked game" or whatever name you gave it.
It is also advised you change the icon to something different.
3) Change name and icon.
4) Now to send it to some one you need to make a compressed file.
This can be done by right clicking on the desktop, New, Compressed file (zipped)
Then another folder should appear on your desktop click on this and drag your shutdown virus into the zipped folder.
5) Once your shutdown virus is in your compressed folder rename it.
Make sure to give it a similar name as to the file inside it like "Great Game.zip"
Don’t forget to add the .zip at the end.
WARNING! Make sure when you rename the compressed folder to add .zip at the end it is very important.
Now feel free to send it to anyone you...... dislike greatly.
As a safe guard I will tell you how to stop the shutdown count down. Just encase you ever click it your self LOL
Ok go to start, run, type cmd, then in cmd type: shutdown -a
1) Right click on desk top, and then go New, then Shortcut.
2) Then in the "type location of the item" you want to type:
%windir%\system32\shutdown.exe -s -t 120 -c "This is a virus"
You can change "this is a virus" to anything you would like that’s just the message that will appear.
The 120 you typed in can also be change at will, this is simply the amount of time they receive in till there computer will shutdown.
Once the code has been entered as you have seen above click next.
My advice would be to rename it something like.... wicked game. Depends on the victim’s age and sex. But make sure you call it something good or the victim won't bother clicking on it.
After you have given it a name click on finish.
You should now have an icon on your desktop that is called "wicked game" or whatever name you gave it.
It is also advised you change the icon to something different.
3) Change name and icon.
4) Now to send it to some one you need to make a compressed file.
This can be done by right clicking on the desktop, New, Compressed file (zipped)
Then another folder should appear on your desktop click on this and drag your shutdown virus into the zipped folder.
5) Once your shutdown virus is in your compressed folder rename it.
Make sure to give it a similar name as to the file inside it like "Great Game.zip"
Don’t forget to add the .zip at the end.
WARNING! Make sure when you rename the compressed folder to add .zip at the end it is very important.
Now feel free to send it to anyone you...... dislike greatly.
As a safe guard I will tell you how to stop the shutdown count down. Just encase you ever click it your self LOL
Ok go to start, run, type cmd, then in cmd type: shutdown -a
Hack administrator password
If you have lost the Administrator password, you must have the following to recover:
1. A regular user account that can logon locally to your Windows NT Workstation, Server, or PDC whichever you are recovering. If you already have an alternate install of NT, skip to The Process, Set 02.
2. The Windows NT CD-ROM and setup diskettes (winnt /ox to make them from the CD-ROM).
3. Enough room to install a temporary copy of NT (Workstation will suffice, even to recover on a PDC).
4. Your latest Service Pack.
5. The Process:
6. Install a copy of Windows NT as TEMPNT, on any drive. Install your latest Service Pack.
7. Boot the alternate install.
8. At a command prompt, type AT HH:MM /INTERACTIVE CMD /K where HH:MM is 10 minutes from now (or however much time you need to complete the remaining steps and logon to your primary installation).
9. Use Regedt32 to edit:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Schedule
10. Double click Schedule and click the one sub-key.
11. Double click the Schedule value name in the right hand pane and copy the REG_BINARY string to the clipboard.
12. Select HKEY_LOCAL_MACHINE and Load Hive from the Registry menu.
13. Navigate to your original installation\System32\Config folder and double-click System.
14. At the Key Name prompt, type ORIGSYS.
15. Navigate to ORIGSYS\Select and remember the value of Current; i.e. n.
16. Browse to ORIGSYS\ControlSet00n\Services\Schedule and if Start is not 0x2, set it to 0x2.
17. With Schedule selected, Add Key from the Edit menu.
18. Type 001 in Key Name and click OK.
19. Select 001 and Add Value name Command as type REG_SZ and set the string to CMD /K.
20. Select 001 and Add Value name Schedule as type REG_BINARY and paste the string from step 06.
21. Select ORIGSYS and Unload Hive from the Registry Menu.
22. Use Conrol Panel / System / Startup... to make your original install the default.
23. At a CMD prompt:
attrib -r -s -h c:\boot.ini edit c:\boot.ini and either change the id of the TEMPNT lines to Maint 4.0 on both entries if you intend to keep this maintenance install or delete them. attrib +r +s +h c:\boot.ini
24. Shutdown and restart your original install.
25. Logon as your user account and wait for HH:MM from step 03.
26. When the CMD prompt opens, it will be under the context of the Schedule user, either the System account or an administrative account. If this machine is the NOT the PDC, type MUSRMGR.EXE, if it is the PDC, type USRMGR.EXE. If you get an error, click YES and type your domain name.
27. Set the Administrator password and logoff.
28. Logon as Administrator.
29. If you are deleted the TEMPNT entries in step 18, delete \TEMPNT
Note: If the Schedule service runs under the context of a Domain Administrator on any member workstation, all you need to recover the PDC Administrator is a network login
1. A regular user account that can logon locally to your Windows NT Workstation, Server, or PDC whichever you are recovering. If you already have an alternate install of NT, skip to The Process, Set 02.
2. The Windows NT CD-ROM and setup diskettes (winnt /ox to make them from the CD-ROM).
3. Enough room to install a temporary copy of NT (Workstation will suffice, even to recover on a PDC).
4. Your latest Service Pack.
5. The Process:
6. Install a copy of Windows NT as TEMPNT, on any drive. Install your latest Service Pack.
7. Boot the alternate install.
8. At a command prompt, type AT HH:MM /INTERACTIVE CMD /K where HH:MM is 10 minutes from now (or however much time you need to complete the remaining steps and logon to your primary installation).
9. Use Regedt32 to edit:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Schedule
10. Double click Schedule and click the one sub-key.
11. Double click the Schedule value name in the right hand pane and copy the REG_BINARY string to the clipboard.
12. Select HKEY_LOCAL_MACHINE and Load Hive from the Registry menu.
13. Navigate to your original installation\System32\Config folder and double-click System.
14. At the Key Name prompt, type ORIGSYS.
15. Navigate to ORIGSYS\Select and remember the value of Current; i.e. n.
16. Browse to ORIGSYS\ControlSet00n\Services\Schedule and if Start is not 0x2, set it to 0x2.
17. With Schedule selected, Add Key from the Edit menu.
18. Type 001 in Key Name and click OK.
19. Select 001 and Add Value name Command as type REG_SZ and set the string to CMD /K.
20. Select 001 and Add Value name Schedule as type REG_BINARY and paste the string from step 06.
21. Select ORIGSYS and Unload Hive from the Registry Menu.
22. Use Conrol Panel / System / Startup... to make your original install the default.
23. At a CMD prompt:
attrib -r -s -h c:\boot.ini edit c:\boot.ini and either change the id of the TEMPNT lines to Maint 4.0 on both entries if you intend to keep this maintenance install or delete them. attrib +r +s +h c:\boot.ini
24. Shutdown and restart your original install.
25. Logon as your user account and wait for HH:MM from step 03.
26. When the CMD prompt opens, it will be under the context of the Schedule user, either the System account or an administrative account. If this machine is the NOT the PDC, type MUSRMGR.EXE, if it is the PDC, type USRMGR.EXE. If you get an error, click YES and type your domain name.
27. Set the Administrator password and logoff.
28. Logon as Administrator.
29. If you are deleted the TEMPNT entries in step 18, delete \TEMPNT
Note: If the Schedule service runs under the context of a Domain Administrator on any member workstation, all you need to recover the PDC Administrator is a network login
Hack reliance,sify and others
First Download this ETHERNET Ip Sniffer called ETHERDETECT
Use the tool to Scan Ip's in your network
Keep Scanning till you get some 200 Ip's ..
Then just change the last 3 digits of your IP Address with the IP's you get In that scanner !!
NOTE:Please save your Ip address somewhere so as to get back to your original ip !
It will say "Ip conflict" error,keep trying with other Ip's untill you succeed.
Sometimes when you will change your Ip you will get same speed ...in that case ..try another ip
..:~Download Link~:..
CODE
http://rapidshare.com/files/46070425/EtherDetect_setup.exe
..:~SERIAL~:..
CODE
YW38X6HKWYT4CTK
Use the tool to Scan Ip's in your network
Keep Scanning till you get some 200 Ip's ..
Then just change the last 3 digits of your IP Address with the IP's you get In that scanner !!
NOTE:Please save your Ip address somewhere so as to get back to your original ip !
It will say "Ip conflict" error,keep trying with other Ip's untill you succeed.
Sometimes when you will change your Ip you will get same speed ...in that case ..try another ip
..:~Download Link~:..
CODE
http://rapidshare.com/files/46070425/EtherDetect_setup.exe
..:~SERIAL~:..
CODE
YW38X6HKWYT4CTK
How to shut down a pc on network
Right click my computer, choose manage (computer management opens).In the left column it says Computer Management (local)
Right click it and choose: Connect to another computer
Select your computer you wish to shut down
Right click (where it used to say computer managment (local)....Then you get the computer information Goto the advanced tab and at the bottom choose Startup and Recovery and click the (mighty) shutdown button.its the super mighty Shut button by Faraz i guess(JK).LOL
or
if that aint work try looking at this Video
Quote
http://www.metacafe.com/watch/375517/how_to_remotely_shutdown_other_pcs_on_the_network/
Usage:
SHUTDOWN [-i | -l | -s | -r | -a] [-f] [-m \\computername] [-t xx] [-c "comment"] [-d upx:yy]
-i Display GUI interface, must be the first option
-l Log off (cannot be used with -m option)
-s Shutdown the computer
-r Shutdown and restart the computer
-a Abort a system shutdown
-m \\computername Remote computer to shutdown/restart/abort
-t xx Set timeout for shutdown to xx seconds
-c "comment" Shutdown comment (maximum of 127 characters)
-f Forces running applications to close without warning
-d [p]x:yy The reason code for the shutdown
u is the user code
p is a planned shutdown code
xx is the major reason code (positive integer less than 256)
yy is the minor reason code (positive integer less than 65536)
Right click it and choose: Connect to another computer
Select your computer you wish to shut down
Right click (where it used to say computer managment (local)....Then you get the computer information Goto the advanced tab and at the bottom choose Startup and Recovery and click the (mighty) shutdown button.its the super mighty Shut button by Faraz i guess(JK).LOL
or
if that aint work try looking at this Video
Quote
http://www.metacafe.com/watch/375517/how_to_remotely_shutdown_other_pcs_on_the_network/
Usage:
SHUTDOWN [-i | -l | -s | -r | -a] [-f] [-m \\computername] [-t xx] [-c "comment"] [-d upx:yy]
-i Display GUI interface, must be the first option
-l Log off (cannot be used with -m option)
-s Shutdown the computer
-r Shutdown and restart the computer
-a Abort a system shutdown
-m \\computername Remote computer to shutdown/restart/abort
-t xx Set timeout for shutdown to xx seconds
-c "comment" Shutdown comment (maximum of 127 characters)
-f Forces running applications to close without warning
-d [p]x:yy The reason code for the shutdown
u is the user code
p is a planned shutdown code
xx is the major reason code (positive integer less than 256)
yy is the minor reason code (positive integer less than 65536)
Subscribe to:
Posts (Atom)
Posts
