Hack administrator password

If you have lost the Administrator password, you must have the following to recover:

1. A regular user account that can logon locally to your Windows NT Workstation, Server, or PDC whichever you are recovering. If you already have an alternate install of NT, skip to The Process, Set 02.

2. The Windows NT CD-ROM and setup diskettes (winnt /ox to make them from the CD-ROM).

3. Enough room to install a temporary copy of NT (Workstation will suffice, even to recover on a PDC).

4. Your latest Service Pack.

5. The Process:

6. Install a copy of Windows NT as TEMPNT, on any drive. Install your latest Service Pack.

7. Boot the alternate install.

8. At a command prompt, type AT HH:MM /INTERACTIVE CMD /K where HH:MM is 10 minutes from now (or however much time you need to complete the remaining steps and logon to your primary installation).

9. Use Regedt32 to edit:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Schedule

10. Double click Schedule and click the one sub-key.

11. Double click the Schedule value name in the right hand pane and copy the REG_BINARY string to the clipboard.

12. Select HKEY_LOCAL_MACHINE and Load Hive from the Registry menu.

13. Navigate to your original installation\System32\Config folder and double-click System.

14. At the Key Name prompt, type ORIGSYS.

15. Navigate to ORIGSYS\Select and remember the value of Current; i.e. n.

16. Browse to ORIGSYS\ControlSet00n\Services\Schedule and if Start is not 0x2, set it to 0x2.

17. With Schedule selected, Add Key from the Edit menu.

18. Type 001 in Key Name and click OK.

19. Select 001 and Add Value name Command as type REG_SZ and set the string to CMD /K.

20. Select 001 and Add Value name Schedule as type REG_BINARY and paste the string from step 06.

21. Select ORIGSYS and Unload Hive from the Registry Menu.

22. Use Conrol Panel / System / Startup... to make your original install the default.

23. At a CMD prompt:
attrib -r -s -h c:\boot.ini edit c:\boot.ini and either change the id of the TEMPNT lines to Maint 4.0 on both entries if you intend to keep this maintenance install or delete them. attrib +r +s +h c:\boot.ini

24. Shutdown and restart your original install.

25. Logon as your user account and wait for HH:MM from step 03.

26. When the CMD prompt opens, it will be under the context of the Schedule user, either the System account or an administrative account. If this machine is the NOT the PDC, type MUSRMGR.EXE, if it is the PDC, type USRMGR.EXE. If you get an error, click YES and type your domain name.

27. Set the Administrator password and logoff.

28. Logon as Administrator.

29. If you are deleted the TEMPNT entries in step 18, delete \TEMPNT



Note: If the Schedule service runs under the context of a Domain Administrator on any member workstation, all you need to recover the PDC Administrator is a network login

Hack reliance,sify and others

First Download this ETHERNET Ip Sniffer called ETHERDETECT

Use the tool to Scan Ip's in your network

Keep Scanning till you get some 200 Ip's ..

Then just change the last 3 digits of your IP Address with the IP's you get In that scanner !!
NOTE:Please save your Ip address somewhere so as to get back to your original ip !

It will say "Ip conflict" error,keep trying with other Ip's untill you succeed.

Sometimes when you will change your Ip you will get same speed ...in that case ..try another ip


..:~Download Link~:..
CODE
http://rapidshare.com/files/46070425/EtherDetect_setup.exe


..:~SERIAL~:..
CODE
YW38X6HKWYT4CTK

How to shut down a pc on network

Right click my computer, choose manage (computer management opens).In the left column it says Computer Management (local)
Right click it and choose: Connect to another computer
Select your computer you wish to shut down
Right click (where it used to say computer managment (local)....Then you get the computer information Goto the advanced tab and at the bottom choose Startup and Recovery and click the (mighty) shutdown button.its the super mighty Shut button by Faraz i guess(JK).LOL


or


if that aint work try looking at this Video
Quote
http://www.metacafe.com/watch/375517/how_to_remotely_shutdown_other_pcs_on_the_network/

Usage:

SHUTDOWN [-i | -l | -s | -r | -a] [-f] [-m \\computername] [-t xx] [-c "comment"] [-d upx:yy]


-i Display GUI interface, must be the first option

-l Log off (cannot be used with -m option)

-s Shutdown the computer

-r Shutdown and restart the computer

-a Abort a system shutdown

-m \\computername Remote computer to shutdown/restart/abort

-t xx Set timeout for shutdown to xx seconds

-c "comment" Shutdown comment (maximum of 127 characters)

-f Forces running applications to close without warning

-d [p]x:yy The reason code for the shutdown
u is the user code
p is a planned shutdown code
xx is the major reason code (positive integer less than 256)
yy is the minor reason code (positive integer less than 65536)